revision 9/26/2012 www.phihong.com 60w power over ethernet splitter poe60 ultra poe gigabit splitter features ? proprietary detection, disconnect and overload protection per ieee802.3af ? gigabit compatible ? non-vented case ? designed to work with poe75u single port injector or better ? diagnostic leds ? 1 year warranty applications ? wimax access point ? computer workstation ? last mile wireless ? multi radio access points safety approvals ? ce mechanical characteristics ? length: 100mm (3.94in) ? height: 27.9mm (1.09in) ? width: 56mm (2.25in) ? weight: 142g (5.0oz) output specifications phihong is not responsible for any error, and reserves the right to make change s without notice. please visit our website at www.phihong.com for the most up-to-date spec ifications and cont act information. model dc output voltage output current POE60D-560 50-57v 52v min when used with poe75u-1up 1.1a designed to work with poe75u-1up single port
input: input voltage range receives power from either data and spare pairs 50 to 57vdc input current 1.4a (dc) max. output: regulation unregulated power 60w for 55-57vdc input range 55w for 50vdc input range efficiency 98% (typical) at maximum load 53vinput short circuit protection output can be shorted permanently without damage environmental: temperature operation 0 to +40c non-operation -20 to +65c humidity operation 5 to 90% immunity esd: en61000-4-2. level 3 rs: en61000-4-3. level 2 cs: en61000-4-6. level 2 emc en55022 class a fcc part 15 class a isolation test the splitter output is non-isolated from incoming poe voltages indicators green led ? output good cable designed to operate up to 100 meters per ieee 802.3, cat 5e or cat6 warranty 1 year input and output data connector rj45 output connector center positive barrel 9mm x 2.5mm id x 5.5mm od tip is user changeable for other sizes poe60d characteristics www.phihong.com dimension diagram unit: mm
|